Build and Install OpenCV 4 for Raspberry Pi | LearnOpenCV #
The Same file on RPi3 is the following:
pi@raspberrypi:~ $ cat /proc/cpuinfo
processor : 0
model name : ARMv7 Processor rev 4 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
.
.
.
Native build on Pi
The simplest, but not so efficient,
way to build OpenCV for Pi
is to do it natively on board.
The build procedure takes hours depending on Pi version and SD-card speed.
1. Install all the required packages on Pi
댓글 없음:
댓글 쓰기